RFID will usually be set up and configured by your RFID vendor. This information is provided for informational purposes. To configure the RFID server and hardware:
1. From Administrative ► Configuration, scroll down to RFID.
2. Set options as follows:
RFID Config File Path |
The location of the RFID configuration file. Use the standard Windows Open File window to find the file. The RFID vendor should provide this file and the path to it. |
RFID Maintains Connection |
Whether the RFID device maintains a connection while scanning. |
RFID Server Type |
The type of server for the RFID device. For TJS, it is Insite. For TracTech, it is Impinj. |
3. Select OK.